Intuitive Design

Designed with both users and caregivers in mind, all movable parts are highlighted in high-visibility orange for easy identification and operation.

→ Why Do You Need the Ergo Anti-tipper?

Product ModelErgo 3
Nominal seat width (mm/in)*410 / 16460 / 18510 / 20410 / 16460 / 18510 / 20410 / 16460 / 18510 / 20
Nominal seat depth (mm/in)**435 / 17435 / 17435 / 17435 / 17435 / 17435 / 17435 / 17435 / 17435 / 17
Front caster / Rear wheel size (in)6 / 14
7 / 14
6 / 14
7 / 14
6 / 14
7 / 14
6 / 20
7 / 20
6 / 20
7 / 20
6 / 20
7 / 20
7 / 247 / 247 / 24
Backrest height (mm)435435435435435435435435435
Headrest height above seat (mm)N/AN/AN/AN/AN/AN/AN/AN/AN/A
Armrest to seat distance (mm)220220220220220220220220220
Front location of armrest structure (mm)0
350
0
350
0
350
0
350
0
350
0
350
0
350
0
350
0
350
Seat surface height at front edge (mm)435
485
435
485
435
485
435
485
435
485
435
485
485485485
Footrest to seat distance (mm)385 – 460385 – 460385 – 460385 – 460385 – 460385 – 460385 – 460385 – 460385 – 460
Effective seat width (mm)420470520420470520420470520
Effective seat depth (mm)435435435435435435435435435
Seat plane angle (X°)666666666
Backrest angle (X°)202020202020202020
Seat to backrest angle (X°)104104104104104104104104104
Leg to seat angle (X°)105105105105105105105105105
Overall length with legrest (mm)1025 – 10501025 – 10501025 – 10501025 – 10501025 – 10501025 – 10501025 – 10501025 – 10501025 – 1050
Overall width (mm)575625675595645695595645695
Overall height (mm)860
910
860
910
860
910
860
910
860
910
860
910
860
910
860
910
860
910
Folded length (mm)770 (Q14)***
770 (F14)****
770 (Q14)
770 (F14)
770 (Q14)
770 (F14)
770 (Q20)
780 (F20)
770 (Q20)
780 (F20)
770 (Q20)
780 (F20)
770 (Q24)
820 (F24)
770 (Q24)
820 (F24)
770 (Q24)
820 (F24)
Folded width (mm)245 (Q14)
285 (F14)
245 (Q14)
285 (F14)
245 (Q14)
285 (F14)
245 (Q20)
310 (F20)
245 (Q20)
310 (F20)
245 (Q20)
310 (F20)
245 (Q24)
310 (F24)
245 (Q24)
310 (F24)
245 (Q24)
310 (F24)
Folded height (mm)660 (Q14)
700 (F14)
700 (Q14)
735 (F14)
740 (Q14)
780 (F14)
660 (Q20)
700 (F20)
700 (Q20)
735 (F20)
740 (Q20)
780 (F20)
660 (Q24)
700 (F24)
700 (Q24)
735 (F24)
740 (Q24)
780 (F24)
Total mass (kg)11.9
12.3
12.2
12.6
12.5
12.9
13.1
13.3
13.4
13.6
13.7
13.9
13.814.114.4
Mass of the heaviest part (kg)8.0
8.4
(Q14)
8.3
8.7
(Q14)
8.6
9.0
(Q14)
8.2
8.4
(Q20)
8.5
8.7
(Q20)
8.8
9.0
(Q20)
8.4
(Q24)
8.7
(Q24)
9.0
(Q24)
10.1
10.5
(F14)
10.4
10.8
(F14)
10.7
11.1
(F14)
11.3
11.5
(F20)
11.6
11.8
(F20)
11.9
12.1
(F20)
12.0
(F24)
12.3
(F24)
12.6
(F24)
Maximum user weight (kg)*****115115115115 / 125115 / 125115 / 125115 / 125115 / 125115 / 125
Minimum turning radius (mm)895900910895900910895900910
Minimum turning radius without user (mm)745750760745750760745750760
Pivot width (mm)111511351155111511351155111511351155
Static stability downhill (X°)141414141414141414
Static stability uphill (X°)141414141414141414
Static stability sideways (X°)141414141414141414
Handrim diameter (mm)N/AN/AN/A435435435520520520
Horizontal location of axle (mm)454545454545454545

* Nominal seat width is measured the width of seat cushion at 120 mm in front of the backrest. This value is
mainly used in the product ordering process.
** Nominal seat depth is measured from the front end of the seat cushion to the back cushion. This value is mainly
used in the product ordering process.
*** F = Fixed axles
**** Q = Quick-release axles
***** The Ergo 3 series is suitable for users up to 125 kg in weight. However, if the wheelchair is equipped with Push &
Pull attendant brake, it is only suitable for users up to 115 kg in weight.
– This wheelchair conforms to the requirements and test methods for static, impact and fatigue
strengths (ISO 7176-8).
– The actual product specifications differ from the data in the table by ±10 mm ±0.5 kg.
– The actual product specifications may vary according to different configurations.
– KARMA reserves the right to modify information herein without further notice.

Manual ver.02

Manual Wheelchair Measurement Method
Download

Get in Touch with KARMA Medical